Malm 34" Zircon Freestanding Direct Vent Gas Fireplace

Malm 34" Zircon Freestanding Direct Vent Gas Fireplace is available in models with Vertical or Horizontal Direct Vent.

About Malm Fireplaces

Malm began making fireplaces in 1960. Malm fireplaces are designed and manufactured in California's Sonoma County near the famed wine country. Modern or traditional designs are available, designed with solid craftsmanship and quality materials.

Our freestanding fireplaces are perfect for today's busy lifestyles. Traditional masonry brick fireplaces take hours to heat the mass of bricks and waste much of the heat. Malm fireplaces heat up rapidly and radiate heat efficiently in all directions. Unlike traditional wood-burning fireplaces, our fireplaces allow you a clear view of your fire from any angle and are available in a range of designer colors.

Malm's selection of architect-designed fireplaces is available in a variety of porcelain colors, brass, stainless, nickel, copper-plated, or matte black finish.

Malm also designs and creates custom fireplaces. Designs include larger size models of the standard units to large units constructed with exotic metal finishes and glass.

Features

• Close clearance 2" to combustibles
• Safety screen
• Ceramic safety glass
• Proflame remote control
• Log set with glowing embers
• Variable speed blower
• Flame height adjustment control
• Standing pilot system
• Direct spark ignition
• Direct vent
• Ceiling Support Box Included

Additional Venting Required (Not Included):

• 2-3” Flex from unit height of 34 1/2” to Ceiling Support Box
• 8” DuraVent DirectVent Pro required from support box through roof to a height specified by DuraVent DirectVent Pro instructions.

Finishes:

• Matte Black
• Powder Coat - Malm uses Tiger Drylac powder for the powder coat colors. Click here to see the complete RAL color chart. Contact us for the desired color and availability of the Powder Coat models.
• Brushed Stainless Steel and Solid Copper (Designer Models) - Contact us for special order information and prices.

Specifications

Model Name	34" Zircon - Direct-Vent
Fuel Type	Natural Gas/ Propane
Max. BTU	NG: 23,500 / LP: 21,500
Min. BTU	NG: 12,500 / LP: 11,000
Connector size	8"
Width	34"
Overall Height	96"
Weight	165 lbs.
Clearance to Combustible Wall	2"
Efficiency (Steady state)	NG: 73.94% / LP: 74.67%
EnerGuide Rating Canada	NG: 63.34% / LP: 64.73%
Tested to	ANSI Z21.88 2016

Warranty

• Limited lifetime warranty

Downloads

• Installation Instructions

Safety Notice

• Improper installation, adjustment, alteration, service, or maintenance can cause injury or property damage. Refer to the manual.
• Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the heater and replace any part of the control system and any gas control that has been under water.
• This appliance is not for use with glass doors.
• Installation and repair should be done by a qualified service person. The appliance should be inspected before use and at least annually by a qualified service person. More frequent cleaning may be required due to excessive lint from carpeting, bedding material, etc. It is imperative that control compartments, burners, and circulating air passageways of the appliance must kept clean.

For California Customers

This product can expose you to chemicals including Carbon Monoxide (CO), which is known to the State of California to cause birth defects or other reproductive harm.
For more information, see CA Prop 65 Warning

Massachusetts State Approval

The 34 Zircon Direct Vent can be installed in Massachusetts as the insert used in our fireplace is a FPI Fireplace Products Intl. L234 Insert. This insert is approved to be installed into our 34 Zircon and is listed by LabTest Certifications. Click here for the L234 Listing State Listing Code.