Malm 32" Spin-A-Fire Freestanding Gas Fireplace with Remote Control

Spin-A-Fire Freestanding Fireplace is available in gas fuel and wood-burning models.

About Malm Fireplaces

Malm began making fireplaces in 1960. Malm fireplaces are designed and manufactured in California's Sonoma County near the famed wine country. Modern or traditional designs are available, designed with solid craftsmanship and quality materials.

Our freestanding fireplaces are perfect for today's busy lifestyles. Traditional masonry brick fireplaces take hours to heat the mass of bricks and waste much of the heat. Malm fireplaces heat up rapidly and radiate heat efficiently in all directions. Unlike traditional wood-burning fireplaces, our fireplaces allow you a clear view of your fire from any angle and are available in a range of designer colors.

Malm's selection of architect-designed fireplaces is available in a variety of porcelain colors, brass, stainless, nickel, copper-plated, or matte black finish.

Malm also designs and creates custom fireplaces. Designs include larger size models of the standard units to large units constructed with exotic metal finishes and glass.

Spin-A-Fire

The Spin-A-Fire is designed and manufactured with Malm's highest quality for lasting beauty and excellent burning efficiency.

Available in Brass, Copper, & Nickel Plated, as well as Matte Black and several Porcelain colors. The Black and Porcelain units require 8" all fuel-chimney and the Plated units require 6" all-fuel chimney down to the top of the hood.

Finishes

• Matte Black
• Powder Coat - Malm uses Tiger Drylac powder for the powder coat colors. Click here to see the complete RAL color chart. Contact us for the desired color and availability of the Powder Coat models.
• Brass, Nickel, or Copper plated (Designer Models) - Contact us for the special order information and prices.
  

Features

• Requires Class A All-Fuel Chimney
• Adjustable Flame Height
• Remote Control Included
• Thermostat Control Optional
• Piezo Ignitor
• Millivolt pilot system does not require power
• Includes pipe to 8' ceiling height
• Ceramic fiber logs with glowing embers
• 12 & 16 Gauge Steel Construction
• Ceramic Glass provides 360 view of fire
• Can be placed directly on carpet or wood floors

Specifications

Model Name	Spin-A-Fire
Fuel Type	Natural Gas/ Propane
BTU	NG: 63,000 / LP: 55,000
Connector size	8” UL All Fuel Chimney Required
Overall Width	32"
Overall Height	102"
Weight	200 lbs.
Clearance to Combustible Wall	6"
Certification	ANSI Z21.50 CSA/CGA 2.22-2014

Warranty

• Limited 5-year warranty

Downloads

• Installation Instructions

Safety Notice

• Improper installation, adjustment, alteration, service, or maintenance can cause injury or property damage. Refer to the manual. For assistance or additional information consult a qualified installer; service agency or the gas supplier. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
• Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the heater and replace any part of the control system and any gas control that has been under water.
• Installation and repair should be done by a qualified service person. The appliance should be inspected before use and at least annually by a qualified service person. More frequent cleaning may be required due to excessive lint from carpeting, bedding material, etc. It is imperative that control compartments, burners, and circulating air passageways of the appliance must kept clean.

Safety Information: See CA Prop 65 WARNING section for more information.