SKU:MCVST42NH

Kingsman 34" MCVST42H Zero Clearance Direct Vent See-Through Gas Fireplace

Name: Kingsman 34" MCVST42H Zero Clearance Direct Vent See-Through Gas Fireplace
Brand: Kingsman
SKU: MCVST42NH
Price: 6976.32 USD
Availability: InStock

$6,976.32

Sale Sold out

Shipping calculated at checkout.

Fuel Type Natural Gas Propane Gas

Ignition Type Millivolt IPI

Product variants

Free Shipping on Orders Over $300
Same-Day Order Processing

OVERVIEW

Make the most of the best view in the house with our line of Zero Clearance Direct Vent See-Through Gas Fireplaces. Ideally suited for new construction or renovations anywhere in your home.

This Kingsman Clean View Direct Vent See-Through Gas Fireplace, with its low profile double-sided chassis, is right for installation into either structural or partition walls, depending on your needs. This fireplace could be a see-through fireplace, allowing it to be the main focus of over one room of your home, and is in a position to utilize either a highly detailed 8-piece traditional log set or a more modern glass media set. it's a standing pilot light feature that ensures continued operation during power outages and is in a position to be matched to a full line of wall switches or remote controls. Kingsman also includes safety barrier screen with the fireplace to make sure your peace of mind and to allow you to enjoy your fireplace in comfort.

Kingsman quality fireplaces allow you to enjoy the wonder of glowing embers and dancing flames and up to 85% maximum efficiency. Create an elegant and warm focal point in your home. Kingsman fireplaces have fully sealed combustion chambers with no pollution spillage to depreciate the indoor air quality of your home.

This fireplace are often customized in a variety of ways. additionally, to fuel type, this unit are often purchased with a remote-ready millivolt ignition or an intermittent pilot ignition (IPI). This fireplace also can be purchased with a variety of interior liner options to further customize your appliance.

STANDARD FEATURES

Color: Black
Size: 34 Inch
Vent Type: Direct Vent
Dedicated Clean View appliance
Fireplace Type: See-Thru Fireplace
Fuel Type: Natural Gas, Propane Gas
ANSI/CSA listed for both USA and Canada
Heater rated with ceramic glass as standard
Specific Use Options: Mobile Home Approved / Bedroom Approved
Able to be equipped with a full line of remotes and wall switches
Includes safety barrier screens to prevent accidental contact with hot glass
Able to utilize either a detailed 8 piece log set or contemporary glass media
Reliable standing pilot valve system operates readily during power outages
Double sided chassis is ideal for installation into both structural and partition walls
Millivolt or IPI valve system allows operation during a power failure with Hi/Low heat and flame adjustment

*Venting Requirements: This unit requires venting pipe with an inner diameter of 5 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit.

PRODUCT SPECIFICATION

Model	MCVST42NH/NHE	MCVST42LPH/LPHE
Fuel	Natural	Propane
Flue	Top	Top
Gas Control	Millivolt / IPI	Millivolt / IPI
Input Max.	31,000 BTU	29,250 BTU
Input Min.	21,000 BTU	23,000 BTU
FE (p.4.1-02)%	66.45% / 68.58%	67.88% / 70.36%
Flue Sizes	5/8"	5/8"
Glass Size	35 5/8" W x 29 9/32"H	35 5/8" W x 29 9/32"H
Glass Type	Ceramic	Ceramic
Size (WxHxD)	43 1/16" W x 51 1/4"H x 24 1/4"D	43 1/16" W x 51 1/4"H x 24 1/4"D
Viewing Area	33 11/16"W x 27 3/16"H	33 11/16"W x 27 3/16"H
Venting	5/8" Flex or 5/8" Hard Pipe* or Power Vent	5/8" Flex or 5/8" Hard Pipe* or Power Vent
Electronic Ignition	Yes	Yes
Certification	Heater	Heater
Bedroom Approved	Yes	Yes

DIMENSIONS

CA Residents: See Prop 65 WARNING

OPTIONAL ACCESSORIES

Click to see Log Grate (Need to Choose Log Set)

Log Grate

Log Grate (M42LG)

Color Options: Steel, Black
Decorative log grate with steel tines
Designed to work with M42LOG4 log assemblies
Accessory component for MCVP42 and MCVST42 series fireplaces

*Note: Not for Use with Propane Appliance.

Click to see Log Set (Required to Complete)

Log Set

Eight Piece Oak Log Set (M42LOG4)

Intricate eight piece log set with oak details
Designed to complete the MCVP42 and MCVST42 series fireplaces
Can be paired with decorative M42LG log grate for added realism

*Note: Not for Use with Propane Appliance.

Six Piece Driftwood Log Set (M42LOG3)

Highly detailed six piece log set mimics the look of real driftwood
Designed to be paired with decorative glass media
Completes the MCVP42 and MCVST42 series fireplaces

Click to see Glass Tray (Required to Complete)

Glass Tray

Glass Tray (MST42GT)

Color: Black
Required for glass media use in the MCVST42/MCVST42H series fireplaces
Acts as both a glass platform and diffuser for a pleasing flame presentation
Requires 20 pounds of glass media for full coverage
Can be used with multiple colors of 1/2" glass media

Click to see Glass Media (Required for Glass Tray)

Glass Media

Glass Media (Z5GC)

Color: Bronze
Type: Glass Media
High luster tempered finish
Contains 5 pounds of 1/2" bronze glass media
Designed for use in contemporary fireplaces configured with glass media trays
For use with Fireplaces and Stoves

*Note: Maximum Amount of Glass: 5lbs for Burner, and 20lbs for Tray.

Click to see Assorted Cannonball

Assorted Cannonball

Assorted Cannonball (RBCB1)

Color: Various Colors
Unique design alternative to glass media
Design for Kingsman fireplaces and stoves
Can be used with glass media accents

Click to see Conversion Kit

Conversion Kit

Conversion Kit to Propane Millivolt (42MST-CKLPH)

For Millivolt Units only
Natural gas to propane
Complete with conversion instructions
For use with MCVST42H Direct Vent Zero Clearance Gas Fireplace
Includes all necessary gas valve and pilot assembly conversion components

Conversion Kit to Natural Gas Millivolt (42MST-CKNGH)

For Millivolt Units only
Propane to natural gas
Complete with conversion instructions
For use with MCVST42H Direct Vent Zero Clearance Gas Fireplace
Includes all necessary gas valve and pilot assembly conversion components

Conversion Kit to Propane IPI (42MST-CKLPHI)

For IPI Units only
Natural gas to propane
Complete with conversion instructions
For use with MCVST42H Direct Vent Zero Clearance Gas Fireplace
Includes all necessary gas valve and pilot assembly conversion components

Conversion Kit to Natural Gas IPI (42MST-CKNGHI)

For IPI Units only
Propane to natural gas
Complete with conversion instructions
For use with MCVST42H Direct Vent Zero Clearance Gas Fireplace
Includes all necessary gas valve and pilot assembly conversion components

Click to see Accent Lighting (For Use with Glass Tray)

Accent Lighting

Universal Light Kit - Two Lamps (ULK3)

Dual halogen lamps accent glass media installations
Works with MCVP42 and MCVST42 series fireplaces
Backlight affect adds a unique touch to glass equipped fireplaces
Can be used to illuminate the fireplace when not in use

Click to see Surround

Surround

Hearth Mount 4” Wide Surround (ZCV42S1BL)

Color: Black
Wide hearth mount style surround with safety screen
Measures 44 5/8" wide by 38 1/8" high
Designed to surround the fireplace when positioned at ground or hearth level
Designed for ZCV42, ZCV42H, MCVST42, and ZVFCV42 series fireplaces

Picture Frame 4” Wide Surround (ZCV42S1PFBL)

Color: Black
Wide picture frame style surround with safety screen
Measures 44 5/8" wide by 40 1/8" high
Designed to frame the fireplace opening and transition to the surrounding wall
Designed for ZCV42, ZCV42H, MCVST42, and ZVFCV42 series fireplaces

Picture Frame 1 5/8" Wide Surround (ZCV42S2PFBL)

Color: Black
Slim picture frame style surround with safety screen
Measures 40 1/8" wide by 35 5/8" high
Designed to frame the fireplace opening and transition to the surrounding wall
Designed for ZCV42, ZCV42H, MCVST42, and ZVFCV42 series fireplaces

Click to see Tile Lip Kit

Tile Lip Kit

Tile Lip Kit (ZCV-TLK)

Color: Black
Type: Tile Lip Kit
Provides a finished edge for tile, brick, or stone against fireplace edges
Recommended for installations without surrounds
Fits Kingsman fireplaces only

Click to see Liner Kit

Liner Kit

2 Piece Traditional Refractory Brick Liner Kit (MST42RLT)

Color: Brown
Designed to add a realistic appearance to the firebox interior
Durable cast refractory construction
Installation hardware included
Mimics the look of traditional running courses of brick

2 Piece Porcelain Liner Kit (MST42PL)

Color: Reflective Black
Amplifies the flame presentation via reflective qualities
Durable porcelain-coated steel finish
Installation hardware included
Sleek modern appearance compliments fire glass installations
Designed specifically for MCVST42 and MCVST42H series fireplaces

Click to see Fan Kit

Fan Kit

Speed Temperature Sensing Fan Kit (Z46FK)

Squirrel cage blower design for quiet and powerful operation
Thermal switch for automatic on/off operation
Variable speed control with built-in all off setting
Designed to fit Kingsman fireplaces

Click to see Log Bits Kit

Log Bits Kit

Four Piece Log Bits Kit (VLBIT4)

Designed to bolster the look of existing Kingsman log sets
Includes four large log chunks
Easy to install and arrange as desired

Six Piece Log Bits Kit (VLBIT6)

Designed to bolster the look of existing Kingsman log sets
Includes six large log chunks
Easy to install and arrange as desired

Click to see Thermostat

Thermostat

Wall Mount Thermostat- For Millivolt Units (Z2MT)

Simple on/off millivolt thermostat design
Easy to use digital control
Allows convenient operation of gas appliances
Simple to wire to existing millivolt systems

Programmable Digital Wall Mount Thermostat- For Millivolt Units (Z80PT)

Schedule programmable for desired operation
Works with Kingsman millivolt appliances
Easy to read digital LCD display

Click to see Remote Control

Remote Control

	On/Off Remote Control for Millivolt/IPI Units (GFRC) Simple on/off operation for millivolt appliances Allows for the operation of the appliance without manual control Included receiver easily mounts within the appliance chassis Reliable RF transmitter operation
	Thermostat Remote Control Millivolt/IPI Units (GTRC, EGTRC) On/off operation with modulating thermostat control Allows for the operation of the appliance without manual control Included receiver easily mounts within the appliance chassis Reliable RF transmitter operation
	Thermostat On/Off modulating for Natural Gas/Propane Millivolt/IPI Units (GTMRCN, GTMRCP, EGTMRCN, EGTMRCP) On/off operation with modulating thermostat control Allows for the operation of the appliance without manual control Included receiver easily mounts within the appliance chassis Reliable RF transmitter operation Includes high/low modulating motor for natural gas and propane gas fireplaces
	Thermostat On/Off modulating and fan control for Natural Gas/Propane Millivolt/IPI Units (GTFRCN, GTFRCP, EGTFRCN, EGTFRCP) On/off operation with modulating thermostat control Allows for the operation of the appliance without manual control Included receiver easily mounts within the appliance chassis Reliable RF transmitter operation Includes high/low modulating motor for natural and propane gas fireplaces Allows for control of optional fan operation

Click to see venting products

venting

Horizontal Vent Starter Kit for 5x8-Inch Venting - Z58HSK5
	When your chimney twists and turns, the Horizontal Flex Vent Chimney Pipe Starter Kit can help the smoke navigate its way out of the house. Includes 5 ft. of flex pipe, termination, and wall thimble
45-Degree DirectVent Pro Elbow - 58DVA-E45
	Use to offset obstructions as needed. Fully unitized, twist-lock construction. Elbows swivel, allowing the lock to remain fully engaged while aligning to the desired direction. The angle will remain fixed at 45°. Finish: Galvanized & Black.
90-Degree DirectVent Pro Elbow - 58DVA-E90
	Use to offset obstructions as needed. Fully unitized, twist-lock construction. Elbows swivel, allowing the lock to remain fully engaged while aligning to the desired direction. The angle will remain fixed at 90°. Finish: Galvanized & Black.
5"x8" DirectVent Pro Pipe Length
	Features a fully unitized twist-lock construction in both 4” x 6 5⁄8” and 5” x 8” vent sizes. Use of sealant is optional unless specified by the appliance manufacturer. Finish: Galvanized & Black.
5"x8" DirectVent Pro Pipe Extension
	Use to add length to a straight length of DirectVent Pro. 8 ½” pipe adds 3”- 7” of length, 16” pipe adds 3”- 14 ½” of length when used with rigid sections of pipe. Direct vent lengths feature a fully unitized, twist-lock construction. Available in black or galvalume exterior.
5"x8" DirectVent Pro Adjustable Pipe
	Use of sealant is optional unless specified by the appliance manufacturer. Available in black or galvalume exterior.
DirectVent Pro Wall Strap - 58DVA-WS
	Use to support vent pipe. Provides 1” clearance. Recommend installing Wall Straps at 4-foot intervals on vertical runs.
DirectVent Pro Ceiling Firestop - 58DVA-FS
	Required for multi-story vertical installations on the second floor and any subsequent floors.
DirectVent Pro Attic Insulation Shield - 58DVA-IS
	Required for installations that pass through an attic to prevent insulation and debris from accumulating near the vent. Provides 1” clearance to combustibles.
DirectVent Pro Adjustable Roof Flashing - 58DVA-F6
	Use to weatherproof the penetration of vent pipe through the roof. Select roof flashing based on pitch of the roof. For pitches of 0/12 - 6/12. Storm Collar required. Made of galvalume.
DirectVent Pro Steep Roof Flashing - 58DVA-F12
	Use to weatherproof the penetration of vent pipe through the roof. Storm Collar required. Made of galvalume.
DirectVent Pro Dead Soft Aluminum Flashings - 58DVA-F6DS
	Available in sizes 4”x 6 5⁄8” and 5”x 8”, in 0/12-6/12 (shown) and 7/12-12/12 styles. Made of malleable dead soft aluminum. Use with metal or tile roofs.
DirectVent Pro Storm Collar - 58DVA-SC
	Use to maintain a weather tight resistant seal between the pipe and the flashing.
DirectVent Pro High-Wind Termination Cap - 58DVA-VCH
	Available in aluminum. Use for vertical terminations only. For vertical terminations only. Provides improved performance in high wind conditions.
DirectVent Pro Low-Profile Termination Cap - 58DVA-VC
	Available in aluminum and stainless steel (S). Use for vertical terminations only. Check the appliance manufacturer’s instructions to determine which caps are approved for use with their appliance.
DirectVent Pro Wall Thimble - 58DVA-WT
	Use with Square Horizontal Cap only. Provides a complete wall-pass-through and firestop. Refer to the appliance manufacturer’s installation instructions for requirements.
DirectVent Pro Square Horizontal Termination Cap - 58DVA-HC
	Use for standard and high-wind through-the-wall termination. Check installation instructions for restrictions on horizontal cap terminations. Available in aluminum, stainless steel (S), and copper (C).
5'/8'/20' Expanded Flex Kit Comes with Springs, Screws and Mill Pac
	This Flex Kit is designed to be used as a part of the Horizontal Vent Starter Kit for 5/8" Chimney Collection. The kit measures 5" by 8" in diameter and measures 5', 8' and 20' long when stretched.
5"/8" Flex Connector - ZDV5FC, ZDV8FC
	This chimney vent is equipped with a flex connector that measures five / eight inches in diameter.
5"/8" Flex Clamp - ZDV5FCL, ZDV8FCL
	This clamp is 5 / 8 inches in diameter. Although the chimney or chimney vent isn't included during this purchase, these things are available for individual sale. Strong enough to withstand pressure
4" Standoff Spring Spacer - ZDV4SS
	Spring standoff spacer is simply the part needed for your chimney vent. This spring spacer measures 4 inches in diameter and has the potential of withstanding years of use. This spacer also will keep its polishing color.
5/8" Horizontal Round Vent Termination - Z58HT
	This Round Horizontal Chimney Pipe Vent Termination provides a circle termination for your chimney.
Horizontal Wall Thimble Shield for Low Enclosures - Z58WTS
	The horizontal wall thimble is a shield for low enclosures and helps traps any unwanted particles in the air. this is often just one type of enclosures that Kingsman provides.
Universal Safety Cage for Horizontal Termination - FDVHSCU
	Universal Safety Cage. Designed for Horizontal Termination. Use with Horizontal Vent Starter Kit.
8" Roof Flashing with Storm Collar - Z58AAF, Z58AF2, Z58AF3
	The roof flashing with storm collar purchase is one of delicate workmanship combined with lasting durability. This storm collar measures 8" in inner diameter. This product has the capability of sealing the vent lengths that protrude from a sloped roof.
8" Storm Collar for Venting - ZDV8SC
	Storm Collars are useful for wetter climates as they divert water from vertical pipes to the flashing around. This Storm Collar will effortlessly snap around the vent pipe and fasten into place, providing you the peace of mind. This Kingsman Storm Collar matches the Kingsman 5"/8" vent systems.
5/8" Vertical Chimney Vent Termination - Z58VT
	It's designed for 5/8" chimney pipes. In fact, it's just one of the various parts that make up the Horizontal Vent Starter Kit Collection for 5/8" Chimneys.
24" Attic Insulation Shield - Z58AIS24
	This shield will protect your attic and roof from the heat that escapes through the chimney. The shield offers 24" of insulation designed to surround your chimney.
Vertical Chimney Vent Offset Support - ZDVVOS
	It'll support your chimney through inclement weather, including heavy rain, snow accumulation, and wind, also as natural wear from gravity over time. The support has been tested for durability and function.
Firestop Spacer for 5x8" Venting - Z58FS
	This Chimney Vent Firestop Spacer provides space between the heat of the smoke going up the chimney. This piece is designed to be used as a part of the Horizontal Vent Starter Kit for the 5/8" Chimney Collection.
Roof Support for Venting - Z58RS
	Designed to be used with 5/8" chimney. Part of the Horizontal Vent Starter Kit for 5/8" chimneys
Hard Chimney Pipe Adapter - Z58DFA
	This Hard Chimney Pipe Adapter is just one item in the Horizontal Power Vent Starter Kit for 5/8" Chimney Collection.
DirectVent Pro Vinyl Sliding Standoff - 58DVA-VSS
	Use as a heat shield on structures with vinyl siding, or other temperature-sensitive materials, to help prevent warping and or melting of the material.
DirectVent Pro Horizontal Windguard - 46DVA-WG
	Fits both 4” x 6 5⁄8” and 5” x 8” terminations. Use with through-the-wall termination cap where high winds are present. Use as a safety heat shield to prevent children or others from coming into contact with the vent termination cap.

DOWNLOADS

View full details